Dear Friends - I am doing Product Cost by Order scenario. After Production order created, I do not see #COST ANALYSIS ( GOTO>COST> Ananlysis) in Product Cost by Order and it is shown Blank. Can you please let me know, if I missed any Customizing step or should choose any specific Layout.
I went through couple of discussions posted earlier related to this issue and still I could not solve my issue. Can you pls help me out.
Thanks
Hi,
Do anyone knows how to schedule a background job, that it runs every 15 minutes all day without 2 hours period between 1:00 and 3:00 am?
Is there any way to put such restriction on job schedule?
Regards,
Marcin
We have differences between balances under Inventory audit report and General Ledger (Balance sheet ) . The difference arises because we have a duplicate good receipt in the Inventory Audit Report by $ 3901.55 . Inventory screens attached audit report and the General Ledger of the " Inventory raw materials " has balances Good receipt corresponding to the dates 04/30/15 and 01/05/15 . I tried to remove the difference between a one entered Journal entry voucher for only $ 3901.55 reversing the transaction in the Inventory Audit Report but it does affect the General Ledger.
Hello Friends - Can you pls clarify my doubt regarding how Target cost is calculated.
Std Cos Est = 97,900*2 = 195,800
My doubt is that when Target is 195,800 (Std Cos Est = 97,900*2 = 195,800), Why System shows 194,600 (Target version - 0)
Thanks
Hello,
In SBO Version 9.1 I have the option to use Text row in production orders.
when I print the document there are no supported layout to display the test row.
Do you know if SAP plan to add such layout soon or any advise on how can I create a new PLD for this?
Thank you
Eran
Hello community,
If you have questions about ACA, you can post this on this thread. We will update this thread with tips and notes related to Affordable Care Act.
The main note has been released today:
2167502 - BEN: Main Note - Affordable Care Act (ACA)
Thank you,
Kind regards,
Graziela Dondoni
Hello All,
I came across a situation where I wanted to understand the difference between SAP_APPL release 606 and 616 (to be precise I was more interested understanding the significance of "1" in 616). Below is what I understood so far and thought to share with you all and seeking advice if its not correct or someone has further inputs to it.
SAP_APPL release 606 would mean Ehp6 of ECC 6.0 on NW lower than 7.4 (i.e; 7.0 to 7.31) and if system is on NW 7.4 or above then release of SAP_APPL would be 616 for Ehp6 of ECC 6.0.
If its Ehp7 of ECC 6.0 then you will find release of SAP_APPL as 617 only and NO 607 because Ehp7 can only be applied on ECC 6.0 if its NW 7.4 or above.
Best Regards,
NK
Hi Experts,
We have integrated HCP (HANA Cloud Platform) and C4C using Odata service and its working fine for Ticket Creation , Display all tickets before 1505 released.
After 1505 we are not able to connect C4C and HCP and when we open SAPUI5 application in HCP error list we are getting below error message.
"Could not establish TLS/SSL connection to host https://myXXXXXX.crm.ondemand.com. Reason: peer not authenticated"
I have tested all OData service working in C4C system but in HCP its give "No data Found" and getting above error in error log.
If anyone has any inputs for resolving this issue kindly provide the same
@Ginger Gatling , @Pushkar Ranjan ,@Rei Kasai @Prabhat Raman we have raised an incident to cloud support team but we haven't got any solution yet, appreciate if you look into Incident :3100871790.
Thanks and Regards,
Mithun Suthar
SAP has promoted SAP Fiori UX as their new UX paradigm by SAP towards a better User Experience of SAP solutions. SAPUI5 is the UI technology which will be used to build the user interfaces. In the past 1 year of projects built using SAPUI5, I have noticed one important aspect. I observed that, even though there is major shift in the technology adoption of Javascript and HTML5 by SAP there is very little change in the solutions and mindset of implemented solutions. Most of the solutions still follow a set paradigm towards user requirements. One factor which has contributed towards this lethargy in UX design is the SAPUI5 patterns.
SAPUI5 patterns are UI templates which propose a design for common set of issues. These UI design templates simplify the UI design. They also ensure that there is consistency in UI design for enterprises. These patterns also help in customer confidence in addressing the UI requirements. However, in the process of standardizing we compromise on the improtant aspect of UX design, which is the User experience. We totally ignore the need to research the expectations of the actual users. To any set of user requirements we restrict the screens to matser-detail or full screen detail layout. UI innovation is only in terms of having used SAPUI5. Apart from the technology itself, there is hardly any strategy/innovation in the UI design.
In all my projects on SAPUI5 so far, the requirements are wire-framed keeping these templates in perspective. due to a lack of structued approach towards UX, we are stuck with SAPUI5 templates running on SAP Portal with in-coherent CSS designs. It all looks like a bad mashup of technologies.
User research is an important factor missing in our proposal and requirement document. Instead of few customers/managers determining the business need, we need to arrive at the broad set of requirements of the intended audience. We are yet to follow a standard methodology to capture the user requirements and that in my view is the lacunae in the UX design. If we are not sure of the actual user's expectation, how can one say that UX design fulfills its purpose.
Design experience is lacking in UI designers. The evolution and exposure to UI designs and graphic technologies is a necessity in having creative and exciting User interfaces. The emphasis should be on skill to beautify the screens would greatly help is modelling the screens.
In all, we have been hearing a lot, talking a lot and feel like implementing a lot of aspects of UX but we are still scratching the surface. Its time to dig our heels and get into the detail of the UX design.
Look forward to your response and opinions.
Thank you.
Regards,
Sharath
Hi Experts,
I've extended a CRM app via WEB IDE, everythings working fine and I wantet to deploy this app to the gateway to test it. I had an extended app before, it was deployed, then the required settings were done (new semantic object, new launchpad in LPD_CUST, new tile with proper target mapping).
Now if I deploy the extended app from WEB IDE it has a strange structre. And I cannot start the application. I always recieve the following error:
File sap/zcrm_myaccounts/index.html NOT found!
I have the following structure in se80:
And this one in webide:
Is there a new way of deploying an extended app from WebIde? I check all the available helps but I did not find any useful info regarding this case. Please advise if you have any ideas.
Best Regards,
David
Hi Experts,
I need to change the datatype in IDT(information design tool) my source is Oracle. From the Date Dimension object, i am getting the date formate as 20-SEP-2015 which is of type string i need to convert to same date format with only datetype change as datetime@the Universe Level
I would need Date Dimension object as datetime type rather String type
Using Oracle 11g and IDT 4.1
Thanks,
Dinya.
Hello Experts,
I am getting this issue while doing a employee sync. When I see the xml from PI, I get a $Version=0; instead of a Session ID. I can see the session ID getting generated in Successfactors sfapi audit log. This configuration worked earlier. I saw that the successfactors certificate had expired. I added the new certificate in the trusted ca's. The issue persist. Kindly provide your inputs.
regards
Syed
Hi,
I am trying to create a connection to mu Auditing DB using ODBC Drivers. I have created a System DSN on the server and creating the connection via Information Design tool on the server.
When I select on "Data Source Name" i get nothing...I would have thought the connection would have been show here?#
Hi, I am not able to install NetWeaver_AS_ABAP/ABAP_Trial_7_02_SP11_Win_64_bit_Version_with_Gateway_2_0_SP04 . I downloades it even. please do the needful.
Hi Experts
I have SAP VMware installed in my laptop. When I am trying to create webdyn pro component,
Layout is not being displayed and an error message of invalid URL is shown.Is any settings to
be done or some host file should be included to make the layout visible.Please help me out
Thanks in advance
Mani
Hi QM experts,
The scenario is that we set the decimals as 3 for quantitative characteristics, and we create an inspection plan via T-CODE QP01. we noted that the upper limit,lower limit or the target value was not showed as 3 decimals. But after double-clicking the item to view the quantitative data on the detailed screen,it showed the 3 decimals as we expected.
Can anyone kindly explain about this and how to make the right display on the characteristic overview screen about the quantitative decimals?
Thanks in advance!
Dear Seniors,
Please explain.....
My client is having working hours of 7.25 hours/day...In this case how to calculate Weekly,Monthly and annual working hours in Work schedule rule
Regards
Mohan
Hi,
Can any one explain me with example what is cut off value in Asset and how it works?
I wanted to know the functionality of cut off value.
Thanks in advance.
Regards
Rizwan
Hi,
I want WT 1347 - Vehicle Allowance to appear in Box 40 in T4. I therefore configured it in cluster table VC_596A_F for T415 for F40. When I processed the payroll. I see this WT in TCRT, but it is not appearing in T4. May I request some one to throw some inputs on this, please.
Thanks and regards,
Victor
Hi experts,
How can I connect custom built system to IDM?
The system was built by customer and uses dbms tables to manage it's login information.
The table structure is simple that USER table for user information and ROLE table for role information and USER_ROLE table for user role assignment information. IDM can connect the system through jdbc.
In IDM configuration guide, there is section for nonSAP system but it handles only MS AD and IBM NOTES system.
Any comment welcome.
regards,
dongsu